dmesg - Western Digital WD10EZEX-00B
Linux version 4.18.0-269.el8.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)) #1 SMP Tue Jan 12 17:55:05 UTC 2021
Command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-4.18.0-269.el8.x86_64 root=/dev/mapper/cs_paska-root ro crashkernel=auto resume=/dev/mapper/cs_paska-swap rd.lvm.lv=cs_paska/root rd.lvm.lv=cs_paska/swap rhgb quiet
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000010000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007ee58fff] usable
BIOS-e820: [mem 0x000000007ee59000-0x000000007f058fff] reserved
BIOS-e820: [mem 0x000000007f059000-0x000000007f158fff] usable
BIOS-e820: [mem 0x000000007f159000-0x000000007f15cfff] ACPI NVS
BIOS-e820: [mem 0x000000007f15d000-0x000000007f1dcfff] ACPI data
BIOS-e820: [mem 0x000000007f1dd000-0x000000007f241fff] usable
BIOS-e820: [mem 0x000000007f272000-0x000000007f298fff] usable
BIOS-e820: [mem 0x000000007f699000-0x000000007f6aefff] reserved
BIOS-e820: [mem 0x000000007f6af000-0x000000007f6cdfff] ACPI data
BIOS-e820: [mem 0x000000007f6ce000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0x7d29d018-0x7d2a5057] usable ==> usable
e820: update [mem 0x7d29d018-0x7d2a5057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000010000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000007d29d017] usable
reserve setup_data: [mem 0x000000007d29d018-0x000000007d2a5057] usable
reserve setup_data: [mem 0x000000007d2a5058-0x000000007ee58fff] usable
reserve setup_data: [mem 0x000000007ee59000-0x000000007f058fff] reserved
reserve setup_data: [mem 0x000000007f059000-0x000000007f158fff] usable
reserve setup_data: [mem 0x000000007f159000-0x000000007f15cfff] ACPI NVS
reserve setup_data: [mem 0x000000007f15d000-0x000000007f1dcfff] ACPI data
reserve setup_data: [mem 0x000000007f1dd000-0x000000007f241fff] usable
reserve setup_data: [mem 0x000000007f272000-0x000000007f298fff] usable
reserve setup_data: [mem 0x000000007f699000-0x000000007f6aefff] reserved
reserve setup_data: [mem 0x000000007f6af000-0x000000007f6cdfff] ACPI data
reserve setup_data: [mem 0x000000007f6ce000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
efi: EFI v2.10 by Dell Inc.
efi: ACPI 2.0=0x7f15c000 ACPI=0x7f15b000 SMBIOS=0x7f15a000 MPS=0x7f159000 MOKvar=0x7ef7c000
secureboot: Secure boot disabled
SMBIOS 2.6 present.
DMI: Dell Inc. PowerEdge T110/0V52N7, BIOS 1.12.0 07/04/2018
tsc: Fast TSC calibration using PIT
tsc: Detected 2261.215 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7f299 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
found SMP MP-table at [mem 0x000fe710-0x000fe71f]
kexec: Reserving the low 1M of memory for crashkernel
BRK [0x2b801000, 0x2b801fff] PGTABLE
BRK [0x2b802000, 0x2b802fff] PGTABLE
BRK [0x2b803000, 0x2b803fff] PGTABLE
BRK [0x2b804000, 0x2b804fff] PGTABLE
BRK [0x2b805000, 0x2b805fff] PGTABLE
BRK [0x2b806000, 0x2b806fff] PGTABLE
BRK [0x2b807000, 0x2b807fff] PGTABLE
BRK [0x2b808000, 0x2b808fff] PGTABLE
RAMDISK: [mem 0x3a83c000-0x3c888fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007F15C000 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F1330 000094 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x000000007F6C3BB4 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x000000007F6AF000 003A02 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 0x000000007F6C6000 000040
ACPI: FACS 0x000000007F6C6000 000040
ACPI: APIC 0x000000007F6C3478 000152 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x000000007F6C35CC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x000000007F6C3620 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DM__ 0x000000007F6C365C 0000A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x000000007F6C3850 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 0x000000007F6C3890 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x000000007F6C39C8 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x000000007F6B2B84 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x000000007F6B2DF4 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x000000007F6B2A04 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x000000007F6B2A34 000150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x000000007F6C3B4C 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 0x000000007F6C7000 000870 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007f298fff]
NODE_DATA(0) allocated [mem 0x7f12f000-0x7f158fff]
Using crashkernel=auto, the size chosen is a best effort estimation.
Reserving 160MB of memory at 1824MB for crashkernel (System RAM: 2031MB)
Zone ranges:
DMA [mem 0x0000000000010000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007f298fff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000010000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000007ee58fff]
node 0: [mem 0x000000007f059000-0x000000007f158fff]
node 0: [mem 0x000000007f1dd000-0x000000007f241fff]
node 0: [mem 0x000000007f272000-0x000000007f298fff]
Zeroed struct page in unavailable ranges: 4235 pages
Initmem setup node 0 [mem 0x0000000000010000-0x000000007f298fff]
On node 0 totalpages: 520053
DMA zone: 64 pages used for memmap
DMA zone: 3984 pages, LIFO batch:0
DMA32 zone: 8075 pages used for memmap
DMA32 zone: 516069 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
ACPI: SPCR: SPCR table version 1
ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size
ACPI: SPCR: console: uart,mmio,0x0
smpboot: Allowing 32 CPUs, 30 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x0000ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7d29d000-0x7d29dfff]
PM: Registered nosave memory: [mem 0x7d2a5000-0x7d2a5fff]
PM: Registered nosave memory: [mem 0x7ee59000-0x7f058fff]
PM: Registered nosave memory: [mem 0x7f159000-0x7f15cfff]
PM: Registered nosave memory: [mem 0x7f15d000-0x7f1dcfff]
PM: Registered nosave memory: [mem 0x7f242000-0x7f271fff]
[mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 511914
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-4.18.0-269.el8.x86_64 root=/dev/mapper/cs_paska-root ro crashkernel=auto resume=/dev/mapper/cs_paska-swap rd.lvm.lv=cs_paska/root rd.lvm.lv=cs_paska/swap rhgb quiet
Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at .
Memory: 1701728K/2080212K available (12293K kernel code, 2200K rwdata, 4028K rodata, 2464K init, 14608K bss, 378484K reserved, 0K cma-reserved)
random: get_random_u64 called from cache_random_seq_create+0x7c/0x140 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37989 entries in 149 pages
ftrace: allocated 149 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 680, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200110
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x209816681d5, max_idle_ns: 440795247830 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.43 BogoMIPS (lpj=2261215)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
FEATURE SPEC_CTRL Present
FEATURE IBPB_SUPPORT Present
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 32K
smpboot: CPU0: Intel(R) Celeron(R) CPU G1101 @ 2.27GHz (family: 0x6, model: 0x25, stepping: 0x5)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 16
smpboot: Total of 2 processors activated (9044.86 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7f159000-0x7f15cfff] (16384 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1612455304.022:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x84000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0048] type 00 class 0x060000
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf8fc000-0xdf8fc3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf8fe000-0xdf8fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b14] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xfca0-0xfca7]
pci 0000:00:1f.2: reg 0x14: [io 0xfc90-0xfc93]
pci 0000:00:1f.2: reg 0x18: [io 0xfca8-0xfcaf]
pci 0000:00:1f.2: reg 0x1c: [io 0xfc94-0xfc97]
pci 0000:00:1f.2: reg 0x20: [io 0xfcc0-0xfccf]
pci 0000:00:1f.2: reg 0x24: [io 0xfcd0-0xfcdf]
pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xfcb0-0xfcb7]
pci 0000:00:1f.5: reg 0x14: [io 0xfc98-0xfc9b]
pci 0000:00:1f.5: reg 0x18: [io 0xfcb8-0xfcbf]
pci 0000:00:1f.5: reg 0x1c: [io 0xfc9c-0xfc9f]
pci 0000:00:1f.5: reg 0x20: [io 0xfce0-0xfcef]
pci 0000:00:1f.5: reg 0x24: [io 0xfcf0-0xfcff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [14e4:165a] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xdf9f0000-0xdf9fffff 64bit]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci_bus 0000:05: extended config space not accessible
pci 0000:05:03.0: [102b:0532] type 00 class 0x030000
pci 0000:05:03.0: reg 0x10: [mem 0xde000000-0xde7fffff pref]
pci 0000:05:03.0: reg 0x14: [mem 0xdeffc000-0xdeffffff]
pci 0000:05:03.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
pci 0000:05:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:03.0: BAR 0: assigned to efifb
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xde800000-0xdf7fffff]
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xde7fffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x84000000-0xfdffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
iommu: Default domain type: Passthrough
pci 0000:05:03.0: vgaarb: setting as boot VGA device
pci 0000:05:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:05:03.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7d29d018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ee59000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f159000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f242000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f299000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x0880-0x08ff] has been reserved
system 00:04: [io 0x0900-0x091f] has been reserved
system 00:04: [io 0x0920-0x0923] has been reserved
system 00:04: [io 0x0924] has been reserved
system 00:04: [io 0x0ca0-0x0ca7] has been reserved
system 00:04: [io 0x0ca9-0x0cab] has been reserved
system 00:04: [io 0x0cad-0x0caf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:05: [irq 0 disabled]
system 00:05: [io 0x0ca8] has been reserved
system 00:05: [io 0x0cac] has been reserved
system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:06: [irq 0 disabled]
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed50000-0xfed53fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:05:03.0: BAR 6: assigned [mem 0xde800000-0xde80ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [mem 0xde800000-0xdf7fffff]
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xde7fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x84000000-0xfdffffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdf9fffff]
pci_bus 0000:05: resource 1 [mem 0xde800000-0xdf7fffff]
pci_bus 0000:05: resource 2 [mem 0xde000000-0xde7fffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x84000000-0xfdffffff window]
pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
MPTCP token hash table entries: 2048 (order: 3, 49152 bytes)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:05:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 33076K
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=19 bucket_order=0
zbud: loaded
pstore: using deflate compression
Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:1c.0: Signaling with IRQ 24
pcieport 0000:00:1c.4: Signaling with IRQ 25
pcieport 0000:00:1c.5: Signaling with IRQ 26
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xde000000, using 1200k, total 1200k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.5.1 model 0x25
intel_idle: Local APIC timer is reliable in all C-states
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 22, io mem 0xdf8fc000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.0-269.el8.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 22, io mem 0xdf8fe000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.0-269.el8.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
intel_pstate: CPU model not supported
EFI Variables Facility v0.08 2004-May-17
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
core: Using 9 MCE banks
microcode: sig=0x20655, pf=0x2, revision=0x7
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (916165173, 0)->(1382002780, -465837607)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS kernel signing key: d88e9c1432438e490600ea58c3097c9221f3d38d'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 29bd4c0d06d2e9911044b5dc973309139b51d6d5'
Loaded X.509 cert 'CentOS Linux kpatch signing key: b49f086205909dc4da2cfa99376fb191d2f09e78'
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'CentOS Secure Boot CA 2: 70007f99209c126be14774eaec7b6d9631f34dca'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
rtc_cmos 00:01: setting system clock to 2021-02-04 16:15:05 UTC (1612455305)
Freeing unused decrypted memory: 2040K
Freeing unused kernel memory: 2464K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 68K
ERST: NVRAM ERST Log Address Range not implemented yet.
systemd[1]: systemd 239 (239-43.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Timers.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Memstrack Anylazing Service.
fuse: init (API version 7.31)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
usb 2-1.4: new low-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2260.985 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20973d13e4e, max_idle_ns: 440795253839 ns
clocksource: Switched to clocksource tsc
usb 2-1.4: New USB device found, idVendor=413c, idProduct=3200, bcdDevice=29.10
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: Dell USB Mouse
usb 2-1.4: Manufacturer: Dell
input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:413C:3200.0001/input/input1
hid-generic 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1.4/input0
usb 2-1.5: new high-speed USB device number 4 using ehci-pci
usb 2-1.5: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: DataTraveler 2.0
usb 2-1.5: Manufacturer: Kingston
usb 2-1.5: SerialNumber: 08606E6D3FDDED8137174EFB
usb 2-1.6: new low-speed USB device number 5 using ehci-pci
tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address b8:ac:6f:97:4d:24
tg3 0000:03:00.0 eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
libata version 3.00 loaded.
usb-storage 2-1.5:1.0: USB Mass Storage device detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: usb-storage 2-1.5:1.0
usbcore: registered new interface driver usb-storage
usb 2-1.6: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.15
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: Dell USB Entry Keyboard
usb 2-1.6: Manufacturer: Dell
usbcore: registered new interface driver uas
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:413C:2107.0002/input/input2
tg3 0000:03:00.0 eno1: renamed from eth0
hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.6/input0
checking generic (de000000 12c000) vs hw (de000000 800000)
fb: switching to mgag200drmfb from EFI VGA
Console: switching to colour dummy device 80x25
mgag200 0000:05:03.0: vgaarb: deactivate vga console
[TTM] Zone kernel: Available graphics memory: 918604 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
scsi host1: ata_piix
scsi host2: ata_piix
ata1: SATA max UDMA/133 cmd 0xfca0 ctl 0xfc90 bmdma 0xfcc0 irq 20
ata2: SATA max UDMA/133 cmd 0xfca8 ctl 0xfc94 bmdma 0xfcc8 irq 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host3: ata_piix
scsi host4: ata_piix
ata3: SATA max UDMA/133 cmd 0xfcb0 ctl 0xfc98 bmdma 0xfce0 irq 21
ata4: SATA max UDMA/133 cmd 0xfcb8 ctl 0xfc9c bmdma 0xfce8 irq 21
fbcon: mgag200drmfb (fb0) is primary device
ata4: SATA link down (SStatus 0 SControl 300)
Console: switching to colour frame buffer device 160x64
mgag200 0000:05:03.0: fb0: mgag200drmfb frame buffer device
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-H653G, DW10, max UDMA/100
ata3.00: applying bridge limits
ata3.00: configured for UDMA/100
[drm] Initialized mgag200 1.0.0 20110418 for 0000:05:03.0 on minor 0
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
ata1.00: SATA link down (SStatus 4 SControl 300)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
scsi 0:0:0:0: Attached scsi generic sg0 type 0
ata1.01: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: configured for UDMA/133
scsi 1:0:1:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
scsi 1:0:1:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
scsi 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:1:0: [sdb] 4096-byte physical blocks
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653G DW10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Attached SCSI removable disk
scsi 3:0:0:0: Attached scsi generic sg3 type 5
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 1:0:1:0: [sdb] Attached SCSI disk
random: fast init done
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
PM: Image not found (code -22)
SGI XFS with ACLs, security attributes, quota, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
printk: systemd: 23 output lines suppressed due to ratelimiting
audit: type=1404 audit(1612455310.114:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
audit: type=1403 audit(1612455310.378:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 286.014ms.
systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 40.827ms.
systemd[1]: systemd 239 (239-43.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: systemd-journald.service: Succeeded.
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
Adding 2134012k swap on /dev/mapper/cs_paska-swap. Priority:-2 extents:1 across:2134012k FS
IPMI message handler: version 39.2
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ACPI Error: No handler for Region [IPMI] (000000008e86f074) [IPMI] (20200110/evregion-132)
ACPI Error: Region IPMI (ID=7) has no handler (20200110/exfldio-265)
ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20200110/psparse-531)
ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20200110/psparse-531)
ACPI Error: AE_NOT_EXIST, Evaluating _PMC (20200110/power_meter-756)
ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
ipmi_ssif: IPMI SSIF Interface driver
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
input: PC Speaker as /devices/platform/pcspkr/input/input3
gpio_ich: GPIO from 436 to 511 on gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a 3420 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
XFS (sdb2): Mounting V5 Filesystem
XFS (sdb2): Ending clean mount
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX
perf: interrupt took too long (2533 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
SELinux: Converting 503 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
Key type dns_resolver registered
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS: Attempting to mount \\192.168.100.11\home
No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
Status code returned 0xc000006d STATUS_LOGON_FAILURE
CIFS VFS: \\192.168.100.11 Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS: Attempting to mount \\192.168.100.11\home
No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
CIFS VFS: Autodisabling the use of server inode numbers on new server.
CIFS VFS: The server doesn't seem to support them properly or the files might be on different servers (DFS).
CIFS VFS: Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
perf: interrupt took too long (3173 > 3166), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3973 > 3966), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4968 > 4966), lowering kernel.perf_event_max_sample_rate to 40000
mpt3sas version 35.101.00.00 loaded
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
SELinux: Converting 586 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 599 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 599 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 600 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 600 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
printk: systemd: 45 output lines suppressed due to ratelimiting
systemd[1]: systemd 239 (239-44.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
systemd[1]: Detected architecture x86-64.
systemd[1]: cgroup compatibility translation between legacy and unified hierarchy settings activated. See cgroup-compat debug messages for details.
SELinux: Converting 639 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 640 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 640 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 652 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
tg3 0000:03:00.0 eno1: Link is down
tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX
tg3 0000:03:00.0 eno1: Link is down
tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX
tg3 0000:03:00.0 eno1: Link is down
tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX
SELinux: Converting 659 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 660 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 660 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 669 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Converting 669 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
usb 2-1.5: USB disconnect, device number 4
usb 2-1.6: USB disconnect, device number 5
usb 2-1.4: USB disconnect, device number 3